Advertisement
Adjusting the Monitor
Tilt Angle
If the tilt angle of the monitor won't move, use the hex
wrench (C) to slightly loosen the screws on both sides
of the VESA plate.
Adjust the screen tilt angle, and retighten the screws.
Adjusting the Arm
Swivel Tension
Adjust the swivel tension by tightening
or loosening the two adjustment
screws at both ends of the lower arm
with the hex wrench (C).
Cable Organization
After the monitor is installed, keep your cables
neat and organized by running them through
the cable channel on the column.
Use the hex wrench (C) or a Phillips screwdriver
to remove the screws that hold the cable
channel covers in place. Bundle your cables
through the channel, and screw the cable
channel covers back on.
11
Advertisement
