Summary of Contents for Better Homes and Gardens BHG BROOKBURY 4PC SECTIONAL DINING
Page 1
USER GUIDE BHG BROOKBURY 4PC SECTIONAL DINING IF REQU CAUTION For outdoor use only! For product assistance & THIS GUIDE CONTAINS missing or replacement parts: IMPORTANT SAFETY WE CAN HELP INFORMATION. Email: Walmart@aeoutdoor.com 877-980-6928 PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Page 2
8-22 OPERATION 23-24 CARE AND MAINTENANCE ..25 PRE-ASSEMBLY ......WARRANTY ....SPECIFICATIONS ......Tools Hardware Parts • Vacuum Packed Cushions. The cushion will return to its full size in 24 hours. Polyester Fabric with 3M Scotchgard • Handwoven, All-weather Resin Wicker...
Page 3
Overview 3-SEATER CORNER SOFA LEFT ARM 3-SEATER TABLE OTTOMAN Safety Precautions ATTENTION Use the correct bolts • Use the correct bolts as indicated. Do not tighten any of the bolts until the product is completely assembled. Do not discard packaging •...
Page 4
Pre-Assembly • Carefully remove all pieces from the carton and make sure that you have all parts (refer to the hardware and parts content list). lf you are missing parts, Email:Walmart@aeoutdoor.com for further assistance. • To avoid scratching your set, please assemble on top of the packaging cardboard or on top of a rug.
Page 5
Model Description PARTS Part Description Part Description BACK OF LEFT ARM SOFA SHORT SIDE PANEL TABLE TOP SEAT OF LEFT ARM SOFA LEFT ARMREST TABLE LEG MIDDLE LEG SHORT FEET SEAT CUSHION SUPPORT BACK CUSHION 1 BACK OF CORNER SOFA SEAT OF CORNER SOFA BACK CUSHION 2 RIGHT ARMREST...
Page 8
Assembly 1. LEFT ARM 3-SEATER REQUIRED (A-2) BACK OF LEFT ARM SOFA ×1 Place the Back (A-2) on its back and attach 1 Short Feet (P-2) by using Bolt M6*80 (EE-2) and Ratchet Tool (HH-2). Pay attention to the direction of the plastic adjustable foot peg which is under the Short Feet (P-2).
Assembly 1. LEFT ARM 3-SEATER REQUIRED Place Seat (B-2) on top of the Back (A-2) on the open section .Attach these two pieces together by using Bolt M6*45 (CC- (CC-2) BOLT M6*45 2),M6*55 (DD-2) ,Washer (FF-2), Lock Nut (GG-2), Ratchet ×2 Tool (HH-2) and Wrench (II-2).
Page 10
Assembly 1. LEFT ARM 3-SEATER REQUIRED Attach the Left Armrest (C-2) to the Seat (B-2) and Back (A-2) Frame by using Bolt M6*45 (CC-2), Washer (FF-2), Lock Nut (C-2) LEFT ARMREST (GG-2), Ratchet Tool (HH-2) and Wrench (II-2). ×1 (CC-2) BOLT M6*45 ×4 (FF-2) WASHER×4 REQUIRED...
Page 11
Assembly 1. LEFT ARM 3-SEATER REQUIRED Attach the Middle Leg (D-2) to the Seat of Left Arm Sofa (B-2) by using Bolts M6*15 (AA-2) and Ratchet Tool (HH-2). (D-2) MIDDLE LEG ×1 (AA-2) BOLT M6*15 ×4 (HH-2) RATCHET TOOL×1 REQUIRED Attach the Support (E-2) to the Seat of Left Arm Sofa (B-2) by using Bolt M6*15 (AA-2), Ratchet Tool (HH-2).
Page 12
Assembly 2. 3-SEATER CORNER SOFA REQUIRED (I-2) LEFT BACK×1 Place the Left Back of Corner Sofa (I-2) on its back and attach 2 Short Feet (P-2) by using Bolt M6*80 (EE-2) and Ratchet Tool (HH-2). Pay attention to the direction of the plastic adjustable foot peg which is under the Short Feet (P-2).
Assembly 2. 3-SEATER CORNER SOFA REQUIRED Note: First twist out the bolt about 3cm,then lift up the Right Armrest (H-2) to insert the bolt into the hole. Put down the (F-2) BACK OF Right Armrest (H-2) and make Right Armrest (H-2) closed to CORNER SOFA×1 Back (F-2).
Assembly 2. 3-SEATER CORNER SOFA REQUIRED Attach the Seat of Corner Sofa (G-2) to the Right Armrest (H-2) and Back Frame (F-2) with Bolt M6*45 (CC-2), Bolt (G-2) SEAT OF M6*55 (DD-2), Washer(FF-2), Lock Nut (GG-2), Ratchet Tool CORNER SOFA×1 (HH-2) and Wrench (II-2).
Page 15
Assembly 2. 3-SEATER CORNER SOFA REQUIRED Note: First twist out the bolt about 3cm, then lift up the Left back (I-2) to insert the bolt into the hole. Put down the Left back (I-2) and make Left back (I-2) closed to Back (F-2). (CC-2) BOLT M6*45 ×4 (FF-2) WASHER×4...
Assembly 2. 3-SEATER CORNER SOFA REQUIRED (II-2) WRENCH×1 Attach the Middle Leg (D-2) to the Seat of Corner Sofa (G-2) REQUIRED by using Bolts M6*15 (AA-2), Ratchet Tool (HH-2). (D-2) MIDDLE LEG ×1 (AA-2) BOLT M6*15 ×4 (HH-2) RATCHET TOOL×1...
Page 17
Assembly 2. 3-SEATER CORNER SOFA REQUIRED Attach the Support (E-2) to the Seat of Corner Sofa (G-2) and Back of Corner Sofa (F-2) by using Bolts M6*15 (AA-2), Ratchet Tool (HH-2). (E-2) SUPPORT×1 (AA-2) BOLT M6*15 ×2 (HH-2) RATCHET TOOL×1 REQUIRED If the gap between the Left back (I-2) and the Back Frame (F-2) is too large, tighten the bolt to adjust the gap by using...
Page 18
Assembly 3. OTTOMAN REQUIRED (K-2) UNDER FRAME ×1 Attach the Under Frame (K-2) to the Long Side Panel (L-2) by using Bolt M6*35 (BB-2), Ratchet Tool (HH-2). (L-2) LONG SIDE PANEL ×1 (BB-2) BOLT M6*35 ×3 REQUIRED Attach the Short Side Panel (M-2) to the Long Side Panel (L-2) by using Bolt M6*35 (BB-2), Ratchet Tool (HH-2).
Page 19
Assembly 3. OTTOMAN REQUIRED Attach the Long Side Panel (L-2) to the Under Frame (K-2) and Short Side Panel (M-2) by using Bolts M6*35 (BB-2), Ratchet Tool (HH-2). (L-2) LONG SIDE PANEL ×1 (BB-2) BOLT M6*35 ×7 (HH-2) RATCHET TOOL×1 REQUIRED Attach 4 Short Feet (P-2) to the Long side panel (L-2) by using Bolt M6*80 (EE-2) and Ratchet Tool (HH-2).
Page 20
Assembly 3. OTTOMAN REQUIRED Put the Ottoman Cushion (U-2) on the Seat top (J-2) and connect the buckle. (J-2) SEAT TOP ×1 REQUIRED (U-2) OTTOMAN CUSHION ×1...
Page 21
Assembly 4. TABLE REQUIRED (N-2) TABLE TOP ×1 Place the Table Top (N-2) face down on a soft surface. Attach the Table Legs (O-2) to the Table Top (N-2) by using 8 Bolts M6*15 (AA-2) . (O-2) TABLE LEG ×2 REQUIRED (AA-2) BOLT M6*15 ×8...
Page 22
Assembly REQUIRED Place the Fixing Clamp (V-2) on the sectional to hold the two pieces together. (V-2) FIXING CLAMP ×2 (Q-2) SEAT CUSHION ×6 REQUIRED Place the cushions on the sectional as shown in the diagram below. And then put the Metal Cover (W-2) on the umbrella (R-2)BACK hole when the umbrella hole is not using.
Page 23
Operation 1. SMALL STORAGE COVER INSTRUCTION Put ottoman under the table. Cover with the small cover (LL-2) and pull the buckle to fasten.
Page 24
Operation 2. LARGE STORAGE COVER INSTRUCTION Cover the Corner Sofa and Left Arm 3-Seater with Large Cover (KK-2) separately, and pull the buckle to fasten.
Page 25
Care and Maintenance Use a furniture cover when not in use. Inspect and ghten all bolts and fasteners on a regular basis to ensure the proper performance and safety of your product. In order to prolong the life and beauty of your furniture, we recommend that it be stored in a dry and protected area during off...
Page 26
Warranty YEAR LIMITED WARRANTY COVERING DEFECTIVE PARTS Contact Manufacturer for Additional Information • For a period of three (3) years after date of purchase, the Manufacturer will either repair or replace defective components in accordance with this Limited Warranty. This warranty is between the Manufacturer and the original purchaser and is valid only when accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase.
Page 27
Specif ications Gross Weight Weight Limit 197.31 lbs Left Arm 3-Seater: 900 lbs 3-Seater Corner Sofa: 900 lbs Table: 188 lbs Ottoman: 600 lbs We'd love to here from you... can here to leave us a product review www.walmart.com/reviews/write-review?productId=3766266617...
Need help?
Do you have a question about the BHG BROOKBURY 4PC SECTIONAL DINING and is the answer not in the manual?
Questions and answers