Advertisement
Quick Links
Maddox Crossing Dining Table
Stock # BH44-084-299-01
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions and
parts list ready to provide the model name, part name or factory number:
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Manufacturing
ADULT ASSEMBLY REQUIRED
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or e-mail your request to parts@whalenfurniture.com
Date 2014-11-08 Rev. 1 Factory: WOFUVI
1-866-942-5362
www.whalenstyle.com
Page 1
LOT NUMBER:
DATE OF PURCHASE: / /
Factory # 15197
Advertisement
Related Manuals for Better Homes and Gardens BH44-084-299-01
Summary of Contents for Better Homes and Gardens BH44-084-299-01
- Page 1 LOT NUMBER: DATE OF PURCHASE: / / Maddox Crossing Dining Table Stock # BH44-084-299-01 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and...
-
Page 2: Quality Guarantee
Stock # BH44-084-299-01 QUALITY GUARANTEE We are confident that you will be delighted with your Whalen Furniture purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. - Page 3 Stock # BH44-084-299-01 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Table Top (1) B- Table Leg (2) C- Center Stretcher (1) D- Mounting Board (2)
- Page 4 Stock # BH44-084-299-01 Assembly Instructions DO NOT fully tighten the bolts or nuts initially until all the bolts or nuts are ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts. 1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to avoid any scratch.
- Page 5 Stock # BH44-084-299-01 Assembly Instructions ② M6 x 75 mm Bolt Small Flat Washer Small Lock Washer (4 used in this step) (4 used in this step) (4 used in this step) ③ ④ 4. Align and attach the Center Stretcher (C) between the Table Legs (B) by inserting the 75 mm Bolt (2) with Lock Washer (3) and Flat Washer (4) through each countersunk hole on the legs and securely screw into the threaded inserts on the Stretcher.
- Page 6 Stock # BH44-084-299-01 Assembly Instructions M6 x 35 mm Bolt (8 used in this step) ① Small Lock Washer (8 used in this step) ③ Small Flat Washer (8 used in this step) ④ M10 x 50 mm Wood Dowel (4 used in this step) ⑤...
- Page 7 Stock # BH44-084-299-01 Assembly Instructions M6 x 35 mm Bolt Small Flat Washer (12 used in this step) Small Lock Washer (12 used in this step) (12 used in this step) ③ ④ ② 7. Flip the assembled base upside down and align the Mounting Boards (D) to the sub-tops properly, using the inserted Wood Dowels (5) as a guide.
- Page 8 Stock # BH44-084-299-01 Assembly Instructions 9. Ask for assistance to lift the unit upright and position it at the desired location. 10. For nice looking, attach 2 Tenon Attachments (E) onto the countersunk holes of the Legs (B) respectively by engaging the plastic fittings. Tap lightly with a rubber mallet, if needed.
-
Page 9: Care And Maintenance
Stock # BH44-084-299-01 Care and Maintenance From time to time please ensure there are no loose nuts on the product. Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.