Component Selection - Herz firestar 15 Operating Instructions Manual

COMPONENT SELECTION 1:

MAIN MENU
Objective: Selecting the components installed
COMPONENT SELECTION 1
HEATING CIRCUIT 1
HEATING CIRCUIT 2
HEATING CIRCUIT 3
HEATING CIRCUIT 4
HEATING CIRCUIT 5
HEATING CIRCUIT 6
SOLAR
BUFFER
2 4 . 1 0 . 0 3 READY
0 5 : 0 5 : 3 4
By pressing the button
F1 : the value behind the bar is selected.
F2 : the value behind the bar is deselected.
F3 : No function
F4 : Changes to the "COMPONENT SELECTION 2" menu
: the bar is pushed up.
: the bar is pushed down.
E : No function
C : No function
Menu : Changes to the "SYSTEM PARAMETERS" menu
OnOff : the system is switched on/off
HEATING CIRCUIT 1:
HEATING CIRCUIT 2:
HEATING CIRCUIT 3:
HEATING CIRCUIT 4:
HEATING CIRCUIT 5:
HEATING CIRCUIT 6:
SOLAR:
BUFFER:
Heating circuits 1 and 2 are to be connected to the clamps
All other heating circuits and solar devices are to be connected to the particular extension cards
Betriebsanleitung firestar 15-40 English V2.8
SERVICE ADJUSTMENT
COMPONENT SELECTION
X
X
Activates the first heating circuit
Activates the second heating circuit
Activates the third heating circuit
Activates the fourth heating circuit
Activates the fifth heating circuit
Activates the sixth heating circuit
Activates the solar module
Activates the buffer
SYSTEM PARAMETERS
F1
+
-
F2
F3
COMP
F4
SEL 2
On
Off
E
C
On/Off
Fault
Menu
Page 53 of 71