Loading Time - Herz firestar 15 Operating Instructions Manual

LOADING TIME

When button E is pressed you go to the settings window of the desired boiler loading time. The
cursor jumps to the left upper corner (Monday, begin loading time 1). By pressing F1 (+) or F2 (-
) you can change the pre-defined times. If you then wish to copy set times, press the F4 (COPY
TIME) key. All days of the week are updated with the new times. However, the cursor must still
be positioned in the same column.
nd
The same applies to the 2 boiler loading time. By pressing the UP ARROW and DOWN
ARROW buttons you can move the cursor to the required position.
Should you have made an incorrect setting, simply press the Clear (C) button and the original
value will be displayed again. This only works, however, if the cursor is still in the position which
you have changed.
This menu can be exited by pressing the menu button.
Betriebsanleitung firestar 15-40 English V2.8 Page 33 of 71