Warm Weather (Thermal Creep) Control - Cal Spas Platinum Spa La Jolla Owner's Manual

+
Keypad functions
Thermal Creep: During the hotter months of the year or when ambient temperatures rise above 85F°.
The heat generated by the spa equipment will begin to warm the spa water without the heater
engaging, this is called Thermal creep. This occurs due to the high efficiency insulation of the
spa retaining heat. Longer filter cycles will raise temperatures when ambient air temp reaches this
threshold. The use of Warm Weather mode will help turn off your filtration cycles once water temp rises.
24
Select logo
After confirmation, the keypad will reset to reconfigure the
system� You will be asked to select the custom icons used
in the sleep mode�
Wi-Fi (in.touch only)
This page allows you to connect your in�touch module to a
Wi-Fi network or to change its network�
For more details about other in�touch connection
methods, please see the in�touch techbook�
After a few seconds the available networks will appear on
the screen, as well as their signal strength�
Swipe Up or Down the list to select your network�
If the Wi-Fi network is password protected, enter it when
prompted�
If no password is required, the in�touch will connect
automatically�
Once the in�touch module is connected to a
Wi-Fi network, a green check mark will appear in
the Wi-Fi menu and the network name will appear
in the Settings menu�
29