Water Care & Filter Cycles - Cal Spas Platinum Spa La Jolla Owner's Manual

18
+
Keypad functions
Water Care
The Water Care page will help you set up your ideal
filtration and heating settings� Choose between
Away from Home, Standard, Energy Savings,
Super Energy and Weekender, depending on your need�
Touch the Water Care name to choose your setting�
A green checkmark will appear on the selected icon to
confirm your choice�
When you select another water care setting, a confirmation
window appears to prevent inadvertent selection that
could result in a setup modification for your spa�
In Economy mode, the set point will be reduced by 20°F*,
which means that the heating system will not be engaged
unless the temperature falls to 20°F below the spa's set
temperature�
The filtration schedule shown on the in�k1000+ screen
will apply to the main filtration pump, most likely pump 1�
If your spa uses a circulation pump configured to run
24 hours, the screen will show you the purge setting
instead of filtration�The purges are pre-programmed for
a fixed number of minutes, therefore the duration will
be set to N/A on the screen and only the start time can
be modified�
* Default pack value
Water care modes
Away from home:
In this mode the spa will always be in economy mode;
the set point will be reduced by 20° F�
Standard:
The spa will never be in economy mode and will be
filtering according to the pack's low level configuration�
Energy Savings:
The spa will be in economy mode during the peak hours
of the day and resume normal mode on the weekend�
Super Energy Savings:
The spa will always be in economy mode during peak
hours, every day of the week�
Weekender:
The spa will be in economy mode from Monday to Friday,
and will run normally on the weekend�
15