Table of Contents
Advertisement
1. Adjust the initial distance (H) between the center of
the turnbuckle clevises on the main frame gauge wheel
turnbuckle assembly (1) to 1206.5 mm (47-1/2 in).
2. Position the main frame gauge wheel turnbuckle as-
sembly (1) to the lower mount of the rocker pivot (A).
NOTE: Orient the turn buckle assembly (1) with the adjust-
ment decal towards the front of the implement.
3. Assemble the washer (C) (removed during disassem-
bly) over the 32 x 152 mm (1-1/4 x 6 in) pin (D) (re-
moved during disassembly).
4. Insert the 32 x 152 mm (1-1/4 x 6 in) pin (D) through
the lower mount of the rocker pivot (2) and the main
frame gauge wheel turnbuckle assembly (1).
5. Insert the 3/8 x 2 in slotted spring pin (2) through the
hole in the 32 x 152 mm (1-1/4 x 6 in) pin (D).
6. Position the adjustment wrench (3) onto the main frame
gauge wheel turnbuckle assembly (1).
7. Position the main frame gauge wheel turnbuckle as-
sembly (1) to the lower mounting hole in the lower
gauge wheel link assembly (G).
8. Insert the 3/8 x 2 in slotted spring pin (2) through the
hole in the 32 x 152 mm (1-1/4 x 6 in) pin (5).
9. Assemble two washers (4) on the 1-1/4 x 6-1/2 in pin
(5).
10. Insert the 1-1/4 x 6-1/2 in pin (5) through the lower
gauge wheel link assembly (G) and the main frame
gauge wheel turnbuckle assembly (1).
11. Insert the 3/8 x 2 in slotted spring pin (2) through the
hole in the 1-1/4 x 6-1/2 in pin (5).
5 - ASSEMBLY
5-2
2
SAVM19TIL0749AA
EN
Advertisement
Table of Contents
