Table of Contents
Advertisement
1. Remove the slotted spring pin (B) and the washer (C)
from the pin (D) in the rocker pivot (A).
2. Discard the slotted spring pin (B).
NOTE: A new slotted spring pin is provided in the kit.
3. Remove the pin (D) from the main frame gauge wheel
turnbuckle assembly (E).
NOTE: Keep this pin for re-assembly.
4. Remove the slotted spring pin (B) and the washer (C)
from the pin (F). Discard the slotted spring pin (B).
NOTE: A new slotted spring pin is provided in the kit.
5. Remove the pin (F) from the main frame gauge wheel
turnbuckle assembly (E) and the lower gauge wheel
link assembly (G). Discard the pin (D).
NOTE: A new pin is provided in the kit.
6. Discard the main frame gauge wheel turnbuckle as-
sembly (E).
4 - PRE-ASSEMBLY
4-3
EN
Advertisement
Table of Contents
