B) Using The Manual Mode - TEFAL OptiGrill XL 2in1 Instructions For Use Manual

1. GRILL POSITION
9
10
Keep warm function
Once the red level is reached, the cooking is finished, the appliance automatically activates the keep warm function,
the indicator light is red, and the device begins to beep every 20 seconds. If food is left on the grill, it will continue to
cook while the cooking plates cool. You may deactivate the beep by pressing the button " OK ".
Note : The security system will power off the appliance automatically after a while.
Cooking a second batch straight away:
Once your first batch of food has finished cooking:
a) Make sure that the appliance is closed, and that no food is remaining inside.
b) Select the cooking program (this step is necessary even if the program is the same as for the foods you have just
finished cooking).
c) Press the button " OK " to begin preheating. While preheating, the color level indicator will flash white.
d) Once preheating is complete, the appliance will beep, and the indicator light will be steady white.
e) The appliance is ready to be used once preheating is complete. Open the grill and place the food inside the
appliance.
Important:
– Please note that preheating is required for each new batch. Before preheating, make sure that the appliance is
closed, and that no food is remaining inside. Wait for preheating to finish before opening the grill and placing
food inside.
– If the new preheating cycle is activated immediately after the end of the previous cycle, the preheating time
will be reduced.
10
9. When the color corresponding to your
desired cooking level becomes steady and
the beep sounds, open the appliance and
remove your food.
Note : If you want to cook food to different
personal tastes, open the grill and remove
the food when it has reached the desired
level and then close the grill and continue
cooking the other food. The program will
continue its cooking cycle until it reaches
the final level.
10. When finished cooking, remove food and
close the appliance. The control panel will
light up and set itself to 'choice of program'
mode.
Comment:The security system will turn off
automatically after a while if no program
selection is made
1. GRILL POSITION

B) USING THE MANUAL MODE

1
3
5
1. Select the manual mode and the cooking
temperature by clicking on M several times
until the colour matches your desired
temperature:
2
2. Press OK to start preheating. The cooking
level indicator flashes with the selected
colour : preheating in progress. Wait until
4
preheating is finished.
3. When the desired temperature is reached,
the light stops flashing and the grill beeps:
the grill is ready to cook.
4. Add the food on the grill, the cooking
process begins.
5. You can adjust the temperature during
cooking.
6. Watch the food cook and remove it when
you consider it cooked as desired.
6
110-125°C
180-195°C
220-235°C
265-285°C
11