Grill Position; A) Using An Automatic Program - TEFAL OptiGrill XL 2in1 Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

1. GRILL POSITION

A) USING AN AUTOMATIC PROGRAM

12 automatic programs:
red meat, burger, sausage, pork, chicken, fish,
seafood, sandwich, pepper, eggplant,
potatoes, veggie steak
1
3
5
8
1. If the food you wish to cook is frozen, press
the corresponding button.
This function is only available when
cooking with the automatic programs,
not in manual mode.
2. Select the appropriate cooking program
according to the type of food you wish to
cook.
Tip, especially for meat: The cooking
2
results on the automatic programs may
vary depending on origin, cut and quality
of the food being cooked, the programs
have been set and tested for good quality
food.
Similarly, the thickness of the meat must
be taken into account during cooking; you
should not cook foods with a thickness
greater than 4 cm.
If you are uncertain about which cooking
program to use, please refer to the cooking
4
guide page 13.
3. Press the "OK" button: the appliance starts
preheating and the cooking level indicator
flashes white.
NB: If you have selected the wrong
program, turn off the appliance and repeat
the steps.
4. Wait for preheating to be complete.
5. When the level indicator stops flashing
white and the grill beeps, the preheating
is complete, the grill is ready to cook.
Comments: At the end of preheating, if
the appliance remains closed, the safety
system will turn off the appliance after a
while.
1. GRILL POSITION
6
7
rare
medium
well-done
8
6. Open the grill and place the food on the
cooking plate.
Comments: If the appliance remains
open for too long, the safety system will
turn off the appliance automatically after
a while.
7. Close the appliance to start the cooking
cycle. The cooking level indicator turns
blue to indicate the cooking is in progress
(for the best results, do not open or move
your food during the cooking process).
The appliance automatically adjusts the
cooking cycle (time and temperature)
according to the food thickness and
quantity.
Note for very thin pieces of food: Close
the appliance, the button OK will flash
and the indicator will stay steady white
until you press OK. Press OK to ensure the
appliance recognizes the food and that the
cooking cycle starts.
8. According to the level of cooking, the
indicator light changes color. While
cooking is in progress, a beep alerts you
each time a cooking level is reached. When
the indicator light is yellow with a beep,
food is rare, orange with a beep, food is
medium and red with a beep, food is well
done.
N.B.: If you like your meat very rare,
remove the meat when the cooking level
indicator reaches steady blue.
Please note, especially on meat, it is normal
that cooking results vary depending on
type, quality and origin of food.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc782dGc782d10

Table of Contents