Checking The Free Travel Of The Foot Brake Lever - KTM 450 RALLY FACTORY REPLICA 2024 Manual

13.7

Checking the free travel of the foot brake lever

Warning
Danger of accidents The brake system will fail if it overheats or is adjusted incorrectly.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear
brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
Ensure that the adjustment steps are performed properly. (Your authorized KTM workshop will be glad
to help.)
–
Clean the brake caliper and the brake caliper bracket.
–
Check that spring plate
sliding plate
rectly.
L02781-10
–
Insert the new brake linings, insert pin
4
pin .
F02416-11
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Add brake fluid up to level
Guideline
A
Dimension
Brake fluid DOT 4 / DOT 5.1 (
–
Position cover
–
Mount and tighten screws
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
F02413-10
7
in the brake caliper and brake pad
8
in the brake caliper bracket are seated cor-
5
A
.
5 mm (0.2 in)
p. 164)
2 3
with membrane .
1
.
BRAKE SYSTEM 13
, and mount cotter
95