Table of Contents
Advertisement
Quick Links
HDMI 2.0a 4K@60 QUAD MULTIVIEWER
W/ROTATION & USB VIDEO CAPTURE
2.0a
© 2016 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: HDM2-SPLITPRO-T4K-V3
WIRELESS
Advertisement
Table of Contents
Related Manuals for Avenview HDM2-SPLITPRO-T4K-V3
Summary of Contents for Avenview HDM2-SPLITPRO-T4K-V3
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
-
Page 2: Table Of Contents
2.4 APPLICATION DIAGRAM ......................... 6 PANEL DESCRIPTION........................7 3.1 INPUT PANEL (HDM2-SPLITPRO-T4K-V3) FRONT………………………………………………7 3.2 INPUT PANEL (HDM2-SPLITPRO-T4K-V3) REAR ..........……………….7 IR REMOTE CONTROL ........................8 4.1 INSTALLATION AND CONNECTING CONTROL SOFTWARE ............9 4.2 SOFTWARE CONTROL INTERFACE ....................11 4.3 CLOUD CONTROL ......................... -
Page 3: Getting Started
SAFETY INSTRUCTIONS The HDM2-SPLITPRO-T4K-V3 is a 4K UHD 4x2 HDMI 2.0a Quad multiviewer with USB video capture and audio out. It has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HDM2-SPLITPRO-T4K-V3 should be used with care. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page 2... -
Page 5: Introduction
Control Software, IR Remote, Ethernet, RS232 or front panel buttons. USB 3.0 Built in 4K Video Capture – The user can capture up to 4K video via the built in USB 3.0 capture to computer. www.avenview.com Page 3... -
Page 6: Features
Input resolution support full range of video resolutions up to WUXGA@60 (RB) or full HD1080p; Uncompressed 7.1ch digital over HDMI RS 232 port for Service mode and firmware upgrade; Supports RS 232, Ethernet, IR Remote and front panel buttons and remote control via cloud platform. Factory Reset feature. Low Latency www.avenview.com Page 4... -
Page 7: Package Content
Software CD Software and User guide available on \\\\\ The Product page on Avenview.com BEFORE INSTALLATION Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. -
Page 8: Application Diagram
APPLICATION DIAGRAM www.avenview.com Page 6... -
Page 9: Panel Description
3.1 INPUT PANEL (HDM2-SPLITPRO-T4K-V3) Front Preset Layouts : Quad Screen / Full Screen Mode Buttons IR Sensor: Receive IR commands from IR remote Resolution Button: 4K UHD/1080p Reserved Buttons: F1 & F2 Rotation Button: +90 & -90 OSD Menu: Menu control button Window Source Selection: Source A/B/C/D 3.2 INPUT PANEL (HDM2-SPLITPRO-T4K-V3) Rear... -
Page 10: Ir Remote Control
Select source B to be the input source Select source C to be the input source Select source D to be the input source Preset 1 User preset 1 Preset 2 User preset 2 Preset 3 User preset 3 Preset 4 User preset 4 www.avenview.com Page 8... -
Page 11: Installation And Connecting Control Software
1. Mount or fix the HDM2-SPLITPRO-T4K-V3 on a secure shelf, AV rack or steady surface; 2. Ensure the power is off on the HDM2-SPLITPRO-T4K-V3, all source devices and displays that will be connected; 3. Connect your (4) four HDMI cables to the (4) four HDMI sources such as (Media Box, Blu-ray player, Laptop or Set-Top- Box or Gaming device);... - Page 12 1. Please note when power cycling device, please restart unit at least 5 to 15 seconds after to allow the power capacitors to discharge. 2. The HDM2-SPLITPRO-T4K-V3 PC control software operates with Microsoft Windows 7, 8, 10, 11 through the interface of Ethernet or RS-232 serial control.
-
Page 13: Software Control Interface
Users can set up the designated inputs, to each window A~D or duplicate, output resolution, PAP predefined layout setting or single input rotation. (1) Source Selection For each display window, you can assign the video source the caption below: Page | www.avenview.com... - Page 14 (3) Output Resolution Set the output resolution from 640x480-4K@60 to match the connected Monitor Timings (4) Save Layout Also the user can define their own 8 custom layouts and save the frequently used scenarios into the flash memory. www.avenview.com Page...
- Page 15 The Horizontal and Vertical coordinate shows the position of input source on the screen. In addition, the display ratio can be adjusted to view the layout in software (Zoom in Zoom out). Page | 13 www.avenview.com...
- Page 16 The control panel of the software illustrates by preview on how those settings would to be presented at the output. Using "DIVIDE- Horizontal/Vertical" (2) Label Text In here, users can easily rename /label the input to be shown on the window with the video to identify the input. Page | 14 www.avenview.com...
- Page 17 (5) Window Label Users can simply determine if the window’s label/border can be shown or invisible. Page | 15 www.avenview.com...
- Page 18 EDID (Extended Display Identification Data) (1) Learn EDID from Default ➢ Select Default EDID ➢ Select Input ➢ Click button to learn default EDID. Page | 16 www.avenview.com...
- Page 19 ➢ The “Firmware update” window pops up as below. ➢ Please select the correct COM port (corresponding to the USB-C) or click “Scan” button then select the correct COM port (corresponding to the USB-C firmware port) to update the device. Page | 17 www.avenview.com...
- Page 20 ➢ Click “update” button to do firmware update. The unit will power cycle atomically when done. (2) Factory Reset ➢ Click button to perform a factory default reset. ➢ The process will take approx. 25 seconds. Page | 18 www.avenview.com...
- Page 21 Displays the Software and firmware version. Software/firmware information is subject to change without prior notice Refresh This function will gather the changes made within software and hardware. Then update the software interface state with its current info. Page | www.avenview.com...
-
Page 22: Cloud Control
SPECIFICATIONS Item Description UNITS HDM2-SPLITPRO-T4K-V3 UNIT DESCRIPTION HDMI 2.0a 4K@60 QUAD MULTIVIEWER W/ROTATION & USB VIDEO CAPTURE HDCP COMPLIANCE Yes 1.4, 2.2 VIDEO BANDWIDTH 600MHz [18Gbps] HDMI HDMI COMPLIANCE Input: HDMI 1.4 /Output: HDMI 2.0a VIDEO FORMAT SUPPORT HDMI 2.0... - Page 23 PARTS: During the Warranty Period of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
- Page 24 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM2-SPLITPRO-T4K-V3 and is the answer not in the manual?
Questions and answers