Table of Contents
Advertisement
Quick Links
HDMI 2.0a 4K@60 QUAD MULTIVIEWER
W/ROTATION & USB VIDEO CAPTURE
2.0a
© 2016 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: HDM2-SPLITPRO-T4K-V2
WIRELESS
Advertisement
Table of Contents
Related Manuals for Avenview HDM2-SPLITPRO-T4K-V2
Summary of Contents for Avenview HDM2-SPLITPRO-T4K-V2
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
-
Page 2: Table Of Contents
2.3 BEFORE INSTALLATION ........................5 2.4 APPLICATION DIAGRAM ......................... 6 PANEL DESCRIPTION........................7 3.1 INPUT PANEL (HDM2-SPLITPRO-T4K-V2) FRONT………………………………………………7 3.2 INPUT PANEL (HDM2-SPLITPRO-T4K-V2) REAR ..........……………….7 IR REMOTE CONTROL ........................8 4.1 INSTALLATION AND CONTROL SOFTWARE ................9 SPECIFICATIONS ..........................20 www.avenview.com... -
Page 3: Getting Started
• Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The HDM2-SPLITPRO-T4K-V2 4x2 Quad multiviewer with 4K UHD input and output with USB capture, audio out and cloud control has been tested for conformance to safety regulations and requirements, and has been certified for international use. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE WARRANTY AND CONTINUED USE OF THE PRODUCT. THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT. www.avenview.com Page 2... -
Page 5: Introduction
Scalable Rotation (90˚ & -90˚) – The user can easily Rotate/Scale only a single input/window image 90˚ left and right. This device can be configured with the Control Software, IR Remote, Ethernet, RS232 or front panel buttons. Cloud Control –This device can be controlled via a cloud control platform where multiple units can be managed simultaneously. www.avenview.com Page 3... -
Page 6: Features
Input resolution support full range of video resolutions up to WUXGA@60 (RB) or full HD1080p; Uncompressed 7.1ch digital over HDMI RS 232 port for Service mode and firmware upgrade; Supports RS 232, Ethernet, IR Remote and front panel buttons and remote control via cloud platform. Factory Reset feature. www.avenview.com Page 4... -
Page 7: Package Content
PACKAGE CONTENTS Before you start the installation of the converter, please check the package contents. HDM2-SPLITPRO-T4K-V2 POWER SUPPLY (12V 5A) IR REMOTE RACKMOUNT BRACKET USER MANUAL BEFORE INSTALLATION • Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. -
Page 8: Application Diagram
APPLICATION DIAGRAM www.avenview.com Page 6... -
Page 9: Panel Description
PANEL DESCRIPTION 3.1 INPUT PANEL (HDM2-SPLITPRO-T4K-V2) Front Preset Layouts : Quad Screen / Full Screen Mode Buttons IR Sensor: Receive IR commands from IR remote Resolution Button: 4K UHD/1080p Reserved Buttons: F1 & F2 Rotation Button: +90 & -90 OSD Menu: Menu control button Window Source Selection: Source A/B/C/D 3.2 INPUT PANEL (HDM2-SPLITPRO-T4K-V2) Rear... -
Page 10: Ir Remote Control
Select source C to be the input source Window D Select source D to be the input source Preset 4 User preset 4 Preset 3 User preset 3 Preset 2 User preset 2 Preset 1 User preset 1 www.avenview.com Page 8... -
Page 11: Installation And Control Software
1. Mount or fix the HDM2-SPLITPRO-T4K-V2 on a secure shelf, AV rack or steady surface; 2. Ensure the power is off on the HDM2-SPLITPRO-T4K-V2, all source devices and displays that will be connected; 3. Connect your (4) four HDMI cables to the (4) four HDMI sources such as (Blu-ray player, Laptop or Set-Top-Box or Gaming device);... - Page 12 1. Please note when power cycling device, please restart unit at least 5 to 15 seconds after to allow the power capacitors to discharge. 2. The HDM2-SPLITPRO-T4K-V2 PC control software operates with Microsoft Windows 98, 2000, XP, 7, 8 through the interface of Ethernet or RS-232 serial control.
- Page 13 Users can set up the designated inputs, to each window A~D or duplicate, output resolution, PAP predefined layout setting or single input rotation. (1) Source Selection For each display window, you can assign the video source the caption below: www.avenview.com Page...
- Page 14 (3) Output Resolution Set the output resolution from 640x480-4K@60 to match the connected Monitor Timings (4) Save Layout Also the user can define their own 8 custom layouts and save the frequently used scenarios into the flash memory. www.avenview.com Page...
- Page 15 The different colors of the frames represent the different inputs for easy identification. The Horizontal and Vertical coordinate shows the position of input source on the screen. In addition, the display ratio can be adjusted to view the layout in software (Zoom in Zoom out). www.avenview.com Page 13...
- Page 16 The control panel of the software illustrates by preview on how those settings would to be presented at the output. Using "DIVIDE- Horizontal/Vertical" (2) Label Text In here, users can easily rename /label the input to be shown on the window with the video to identify the input. www.avenview.com Page 14...
- Page 17 (5) Window Label Users can simply determine if the window’s label/border can be shown or invisible. www.avenview.com Page 15...
- Page 18 MAC: Gets and displays Device Ethernet port MAC address EDID (Extended Display Identification Data) (1) Learn EDID from Default ➢ Select Default EDID ➢ Select Input ➢ Click button to learn default EDID. www.avenview.com Page 16...
- Page 19 System Setting (1) Firmware Update ➢ Click button to perform authorized firmware update. ➢ The “Firmware update” window pops up as below. ➢ Please select the correct COM port or click “Scan” button to connect device. www.avenview.com Page 17...
- Page 20 ➢ Click “update” button to do firmware update. (2) Factory Reset ➢ Click button to perform a factory default reset. ➢ The process will take approx. 25 seconds. www.avenview.com Page 18...
- Page 21 Displays the Software and firmware version. Software/firmware information is subject to change without prior notice Refresh This function will gather the changes made within software and hardware. Then update the software interface state with its current info. www.avenview.com Page 19...
- Page 22 The Registration page will pop up and please fill in your email and password information to create your private account. Add Device to Eagleyes 1. Firstly, please make sure the device is connected to the Ethernet. Then please executing the software with device to get the register code (Note: the status of software is connected). www.avenview.com Page 20...
- Page 23 3. Enter the Installer Email for online support in the future, and the Association Code for pairing with your device. 4. After adding the device, the list of device related to your account will show on the right top corner. You can click the button to switch device for control. www.avenview.com Page 21...
-
Page 24: Specifications
SPECIFICATIONS Item Description UNITS HDM2-SPLITPRO-T4K-V2 UNIT DESCRIPTION 4x1 HDMI 2.0 Quad multiviewer with Rotation, 4K@60 support on output HDCP COMPLIANCE Yes 2.2 VIDEO BANDWIDTH 600MHz [18Gbps] HDMI HDMI COMPLIANCE Input: HDMI 1.4 /Output: HDMI 2.0a VIDEO FORMAT SUPPORT HDMI 2.0... - Page 25 PARTS: During the Warranty Period of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
- Page 26 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the HDM2-SPLITPRO-T4K-V2 and is the answer not in the manual?
Questions and answers