Table of Contents
Advertisement
Quick Links
S W - 4 K H D M
- 4 X 4
© 2016 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Control Your Video
4X HDMI 2.0 SWITCHER
W/IR/RS232/ETHERNET/
4K/UHD SUPPORT
VIDEO WALLS
VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS
SPLITTERS
CABLES & ACCESSORIES
Model #: SW-HDM2-T4K-4X1
WIRELESS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avenview SW-HDM2-T4K-4X1
Summary of Contents for Avenview SW-HDM2-T4K-4X1
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any...
- Page 2 Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
-
Page 3: Table Of Contents
BEFORE INSTALLATION ...................... 7 CABLE SPECIFICATIONS ..................... 7 APPLICATION DIAGRAM ..................... 8 PANEL DESCRIPTION ........................9 3.1 FRONT PANEL (SW-HDM2-T4K-4X1) ..................9 3.2 REAR PANEL (SW-HDM2-T4K-4X1)..................10 IR REMOTE AND CABLE DEFINITION ................11 D-SUB 9-PIN DEFINITIONS....................12 WEB GUI CONTROLS.....................13-16 TELNET CONTROL......................17 RS232 CONTROL......................18-19... -
Page 4: Important Safeguards
Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The Avenview SW-HDM2-T4K-4X1 HDMI Switcher set has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SW- HDM2-T4K-4X1 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 5: Regulatory Notices Federal Communications Commission (Fcc)
REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. -
Page 6: Introduction And Features
INTRODUCTION Avenview 4x1 HDMI 4K@60 Switcher allows the transmission of video and multi-channel digital audio at 4K resolution. It allows the transmission of 18Gbps HDMI signal from any of its four HDMI 2.0 source inputs to one HDMI 2.0 with HDCP 2.2 support connected display. With supports 4K2K@60, 48-bit Deep Color, HDR (High Dynamic Range) audio and other features defined by HDMI 2.0 specifications. -
Page 7: Package Contents
PACKAGE CONTENTS Before you start the installation of the switcher, please check the package contents. 4X1 HDMI 2.0 Switcher IR EXTENDER IR REMOTE Power Adapter (5V/2.6A DC) User’s Manual Page|6 www.av enview.com... -
Page 8: Before Installation
BEFORE INSTALLATION Put the product on an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. -
Page 9: Application Diagram
APPLICATION DIAGRAM Page|8 www.av enview.com... -
Page 10: Panel Description
PANEL DESCRIPTION 3.1 FRONT PANEL (SW-HDM2-T4K-4X1) Power Button: Powers the device ON or OFF. LED IR Window: IR receiver window receives remote illuminate when the device is powered ON control signals from the supplied IR Remote Power Indicator: Illuminate Red when device is in SYNC: Illuminates green when connected to sink Stand by mode, Illuminates green when device is ON. -
Page 11: Rear Panel (Sw-Hdm2-T4K-4X1)
3.2 REAR PANEL (SW-HDM2-T4K-4X1) HDMI IN: Connect input sources such as DVD/ HDMI Out: Connect to HDMI TV's/displays or Blu-ray players with HDMI cables. monitors for both audio and video signal transmission. USB 2.0: Service Slot for firmware update LAN Control: Connect to an active network to be Please use a USB drive to update firmware. -
Page 12: Ir Remote And Cable Definition
Input 1-4: Press 1-4 to select the coressponding input port. INPUT Avenview IR Socket IR EXTENDER: plug in the IR Extender into the rear of the unit to receive all IR command signals from the supplied IR Remote control. Page|11 www. avenview.com... -
Page 13: D-Sub 9-Pin Definitions
D-SUB 9-PIN DEFINITIONS SW-HDM2-T4K-4X1 Third Party RS-232 Controller Definition Definition Baud Rate: 19200bps Data Bit: 8 bits Parity: None Stop Bit: 1 Flow Control: None Page|12 www. avenview.com... -
Page 14: Web Gui Controls
WEB GUI CONTROL On a PC/Laptop that is connected to the same active network as the SW-HDM2-T4K-4X1, open a web browser and type device IP address (can be identified from RS-232's help command or use the default IP: 192.168.1.50) on the web address entry bar. The browser will display the device status, control and User settings. - Page 15 Click on EDID Control for EIDID selections. 6.3 HDCP CONTROL Two HDCP modes are available: Enable and Disable Enable mode is required when using all other devices connected to the unit. Disable mode is required when using Apple brand products. Page|14 www. avenview.com...
- Page 16 Please click SAVE button to complete the process when finished. 6.5 HDMI OUTPUT INFO This info tab displays the information of the HDMI output:- Type, Manufacturer name, native resolution, color depth, 3D/4K Support Yes/No Also audio format. Page|15 www. avenview.com...
- Page 17 6.6 NETWORK SETTINGS Within this TAB the user can set their preferred Network IP mode :- DHCP, STATIC, IP Address, Net Mask, Gateway, HTTP Port and Telnet port Page|16 www. avenview.com...
-
Page 18: Telnet Control
Under Mac OS X, go to Go→Applications→Utilities→Terminal See below for reference. As the below caption when the command prompt type "telnet", then the IP address, and hit enter. Type “Help” or “?” then hit enter to bring up all available commands. Page|17 www. avenview.com... -
Page 19: Rs232 Control
Show Input EDID NONE Source EDIDIN N1 Show Input N1 EDID N1=1-4 Source EDIDIN N1 N2 Set Input N1 EDID N1=1-4 N2=1-9 (ref. Source EDID All) HDCPIN Input HDCP Status NONE HDCPIN N1 Show Input N1 HDCP N1=1-4 Status Page|18 www. avenview.com... - Page 20 Factory Default Note: All the RS-232 command will be not executed unless followed with a carriage return. Commands are case-sensitive. *HDCP ON/OFF equivalent to HDCP standard and Apple mode. IP address's default setting is on static 192.168.1.50 Page|19 www. avenview.com...
-
Page 21: Edid Management
Input 2’s EDID EDID Appoint EDID IN3 Input 3’s EDID EDID IN4 Input 4’s EDID Note: EDID function only selectable under RS-232 and WebGUI control. Power cycling the device will set the EDID mode to EDID All- HDMI OUTPUT. Page|20 www. avenview.com... -
Page 22: Installation
7. Press the Power Switch located on the front panel to power on the unit (LED will illuminate Green) Avenview SW-HDM2-T4K-4X1 is supplied with an IR Extension cable to allow the uni to be placed with a cabinet or rack and be controlled from a distance with the IR Remote. -
Page 23: Supported Resolutions
DVI and HDMI Supported Resolutions Input Output 640x480@60 640x480@72 640x480@75 720x480@60 720x576p@50 800x600@60 800x600@72 800x600@75 1024x768@60 1024x768@70 1024x768@75 1280x720@50 1280x720@60 1280x720p@60 1280x768@60 1280x800@60 1280x1024@60 1360x768@60 1600x1200@60 1920x1080i@50 1920x1080i@60 1920x1080p@24 1920x1080p@25 1920x1080p@30 1920x1080p@50 1920x1080p@60 1920x1200@60(RB) 3840x2160@24/25/30, 50/60 Y420 4096x2160@24/,50/60 Y420 Page|22 www. avenview.com... -
Page 24: Specifications
SPECIFICATIONS ITEM DESCRIPTION SW-HDM2-T4K-4X1 UNITS 4X1 4K@60/UHD HDMI Switcher with IR/RS-232/ Support UNIT DESCRIPTION HDCP 600 MHz (6 Gbps) VIDEO BANDWIDTH SUPPORTED 480i~UHD (3840x2160@24/25/30/50/60 & 4K (4096x2160@24/25/30/50/60Hz) RESOLUTIONS PCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby Digital Plus, AUDIO SUPPORT... - Page 25 PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
- Page 26 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the SW-HDM2-T4K-4X1 and is the answer not in the manual?
Questions and answers