Operation And Safety Decals - MULTIQUIP WHITEMAN BA Series Operation And Parts Manual

P/N 20526
P/N 2938
57.71
,11/117 1....". ilawa kaAlTi
P/N 1735
P/N1499
P/N 1261
Przi
Wiri g
FEM
E" 7
1 1 . sm i
P/N 1940
PI CH
BOISE, IDAHO USA
U. S. PATENT
xxxxxxx
CRETE FIN'S
P/N 1758
P/N 1492
P/N 20527
P/N 1736
jWARNING
INJURY COULD RESULT IF FINISHER IS LIFTED
WITHOUT PITCH HANDLE FIRMLY ENGAGE
CAUTION
DO NOT LIFT MACHINERY BY GUARD
RING. MAY CAUSE DAMAGE TO
GUARD RING SHOCK MOUNTS
USE LIFT HANDLES ONLY
s
iAlif*511".. . ;;
TROWEL
VADE . USA
PRELOAD TRIM INDICATOR
FINISH 4-- COMBO FINISH COMBO
A\WARNING!
DO NOT OPERATE HANDLE UNTIL IT IS
SECURELY FASTENED TO POWER TROWEL
& INSTRUCTIONS HAVE BEEN READ
Machine Safety Decals
The BA-Series walk-behind trowel is equipped with a number of safety decals. These decals are provided for operator safety and
maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals
become unreadable, replacements can be obtained from your dealer.
r--
Symbol indicates that it is mandatory to wear
safety glasses, safety helmet and ear protection.
P/N 11247
(Part of decal kit 12620)
CONTACT MULTIQUIP
SERVICE DEPT.
NAMEPLATE
Symbol indicates that it is mandatory to wear
gloves.
P/N 11247
(Part of decal kit 12620)
Symbol indicates that it is mandatory to
wear safety shoes, with extra protection
(steel toed).
P/N 11247
(Part of decal kit 12620)
JJJ
Radiating heat symbol. Symbol indicates equipment
is hot.
P/N 11246
(Part of decal kit 12620)
dir0
This is the symbol for belt drive.
P/N 11246
(Part of decal kit 12620)
<1
Symbol for examining or checking of the machine.
Mostly used for maintenance. Check lubrication
oil in gearbox.
P/N 11246
(Part of decal kit 12620)
0
This is the symbol for gear drive.
P/N 11246
(Part of decal kit 12620)
Figure 1. BA
-
Series Trowel Decals
PAGE 12 — BA-SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #3 (11/30/04)