Specifications - Spektrum AR20410T Manual

AR20410T PowerSafe Telemetry Receiver
The Spektrum™ AR20410T Receiver is full range with telemetry, and is
compatible with all Spektrum™ DSM2
Perform the setup for the AR20410T receiver through a compatible Spektrum
Transmitter with Forward Programming. The Spektrum PC Programmer can be
used for firmware updates.

Specifications

Type
Application
Channels
AS3X+
Remote Receivers
Modulation
Telemetry
Bind Method
Failsafe
Power Button
Band
Dimensions (LxWxH)
Weight
Input Connector
Input Voltage
Resolution
IMPORTANT
: The AR20410T receiver only uses forward programming for the
configuration, do not use the AS3X menu in the main transmitter menu.
WARNING:
propeller should not be installed on the motor during the setup
procedure. Only install the propeller once the throttle has been confirmed to
operate correctly and the failsafe has been set.
As an additional safety feature, we recommend the throttle cut is enabled.
Throttle cut should be engaged any time the aircraft is powered on and not
in operation. The motor will not rotate when throttle cut is in the ON position.
Scan the QR for more information on advanced setup.
and DSMX
®
DSMX 20 CH Telemetry Receiver
Available with optional Synapse sensor
(2–4) SRXL2
[3-SPM9747 and 1-SPM4651T Included]
On Receiver, Remote Switch
2.4" x 2.72" x 0.75" (61mm x 69mm x 19mm)
(2) IC3 Input Connectors with Smart Technology
2048 (4096 for Stabilization)
For electric powered aircraft and if equipped, the
technology transmitters.
®
AR20410T
Airplane
20
Remote Receivers
™
DSMX
Integrated
Bind Button, Bind Plug
Yes
2.4GHz
2.82 oz (80g)
4V–12.6V
EN
3