Table of Contents
Advertisement
Figure 23. Installing a processor
1.
socket-release lever 1
3.
processor
5.
processor shield
7.
processor socket
Next steps
NOTE: Ensure that you install the heat sink after you install the processor. The heat sink is necessary
to maintain proper thermal conditions.
1.
Install the heat sink.
2.
If removed, reinstall the PCIe expansion card riser.
3.
If disconnected, reconnect the cables to the expansion card(s).
4.
While booting, press F2 to enter System Setup and verify that the processor information matches the
new system configuration.
5.
Run the system diagnostics to verify that the new processor operates correctly.
88
2.
pin–1 corner of the processor
4.
slot (4)
6.
socket-release lever 2
8.
tab (4)
Advertisement
Table of Contents
Troubleshooting
