Table of Contents
Advertisement
Steps
1.
To enter System Setup, press F2 immediately after turning on or restarting your system.
2.
On the System Setup Main Menu screen, click System BIOS → System Security.
3.
On the System Security screen, ensure that Password Status is set to Unlocked.
4.
In the System Password field, alter or delete the existing system password, and then press Enter or
Tab.
5.
In the Setup Password field, alter or delete the existing setup password, and then press Enter or Tab.
If you change the system and setup password, a message prompts you to reenter the new password.
If you delete the system and setup password, a message prompts you to confirm the deletion.
6.
Press Esc to return to the System BIOS screen. Press Esc again, and a message prompts you to save
the changes.
Related Links
System Security
Operating with a setup password enabled
If Setup Password is set to Enabled, type the correct setup password before modifying the system setup
options.
If you do not type the correct password in three attempts, the system displays the following message:
Invalid Password! Number of unsuccessful password attempts: <x> System Halted!
Must power down.
Even after you turn off and restart the system, the error message is displayed until the correct password is
typed. The following options are exceptions:
•
If System Password is not set to Enabled and is not locked through the Password Status option, you
can assign a system password. For more information, see the System Security Settings screen section.
•
You cannot disable or change an existing system password.
NOTE: You can use the password status option with the setup password option to protect the
system password from unauthorized changes.
Related Links
System Security
System Information
You can use the System Information screen to view system properties such as Service Tag, system model
name, and the BIOS version.
Related Links
System Information details
System BIOS
Viewing System Information
Viewing System Information
To view the System Information screen, perform the following steps:
1.
Turn on, or restart your system.
2.
Press F2 immediately after you see the following message:
F2 = System Setup
42
Advertisement
Table of Contents
Troubleshooting
