Dell DR4300e Owner's Manual page 73

2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Ensure that the cables are correctly installed and retained by the cable retention
bracket before installing the cooling fan assembly. Incorrectly installed cables may get damaged.
Steps
1. Align the slots on the cooling fan assembly with the guide pins on the chassis.
2. Slide the cooling fan assembly into the chassis.
3. Lock the cooling fan assembly into the chassis by lowering the release levers until firmly seated.
Figure 16. Installing the cooling fan assembly
1. cooling fan assembly
3. release lever (2)
5. cooling fan connector (6)
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
2. cooling fan (6)
4. guide pin on the system board (2)
6. guide pin on the chassis (6)
73