Checking The Riding Light - Bosch ZEMO ZE FS P12 Translation Of The Original Operating Instructions

Table of Contents

Advertisement

7.5.4

Checking the riding light

1 Check the cable connections on the headlight
and rear light for damage and corrosion and
ensure they are firmly in position.
 If cable connections are damaged or corroded,
or are not firmly in positioned. take pedelec out
of service. Contact specialist dealer.
2 Switch light on.
3 Check that the headlight and rear light come
on.
I
II
III
Figure 180: Light positioned too high (1), correctly (2) and too low (3)
6 Check the position of the light beam.
 If the light is positioned too high or too low,
adjust riding light (see Section 6.4.16.1).
MY23Z12 - 12_1.0_26.01.2024
Cleaning, maintenance and inspection
 If the headlight or rear lights do not come on,
take pedelec out of service. Contact specialist
dealer.
4 Place pedelec 5 m from the wall.
5 Stand the pedelec up straight. Hold the
handlebars straight with both hands. Do not
use the kickstand.
1
2
1
2
1
2
179

Advertisement

Table of Contents
loading

This manual is also suitable for:

Za-15-0064

Table of Contents