Table of Contents
Advertisement
Setting the vibration feedback
The vibration feedback can be adjusted.
1 Open the S E TT INGS ME NU.
2 Open <My Bike><Vibration feedback>.
3 – Select ON if you wish every press of a button
and every active message to produce vibration
feedback.
– Select OFF if you do not wish vibration
feedback to be produced.
– Select ONLY WITH MESSAGES if you wish
vibration feedback to be produced for
messages only.
The selected vibration feedback is produced.
Adjusting charge mode
Charge mode and long-life mode can be adjusted.
The faster the battery is charged, the shorter its
life cycle will be. It can shorten the battery's
service life by up to 50%.
1 Open the S E TT INGS ME NU.
2 Open <Charge>.
3 – Select <Normal> if you wish the battery to be
charged at a normal rate.
– Select <Fast> if you wish the battery to be
charged at a fast rate.
– Select <Charge to Storage> if you wish to
store the battery for a longer period of time.
– Select <LONG LIFE> if you wish to extend
the battery's life cycle considerably. The
battery capacity is reduced as a result.
The selected charge mode is implemented.
MY23Z12 - 12_1.0_26.01.2024
Resetting all tour data
All values in the TOUR MAIN MENU and SUB-
MENU can be reset.
•
Trip
•
Time
•
Trip Height
•
Cons.
•
MAX
•
AVG.
1 Open the S E TT I NGS ME NU.
2 Open <Reset values><Trip Reset>.
3 Follow the instructions on the display.
All tour data are reset.
Resetting to factory settings
The system settings can be reset to their factory
settings.
1 Open the S E TT I NGS ME NU.
2 Open <Reset values>< Factory Reset>.
3 Follow the instructions on the display.
All settings are reset to the factory settings.
Displaying error messages
1 Open the S E TT I NGS ME NU.
2 Open <Messages>.
The list of current error messages is shown.
Displaying the software version
1 Open the S E TT I NGS ME NU.
2 Open <About>.
The software versions for the individual
components will be shown.
Operation
126
Advertisement
Table of Contents
