Bosch ZEMO ZE FS P12 Translation Of The Original Operating Instructions page 109

6.4.9.7 Setting the grip distance for a MAGURA handbrake disc brake
Only applies to pedelecs with this equipment
WARNING
!
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any
time. This may cause a crash with injuries.
 Ensure that the fully applied handbrake is at a
minimum distance of 20 mm from the
handlebars.
Figure 117: Adjusting the grip distance for a MAGURA handbrake disc brake
MY23Z12 - 12_1.0_26.01.2024
The handbrake position can be adjusted to the
rider's requirements. Such adjustment does not
affect the pressure point or the position of the
brake linings.
 Turn the setting screw/twist knob (5) anti-
clockwise towards minus (–).
 The handbrake will move closer to the
handlebar grip.
 Turn the setting screw/twist knob (5) clockwise
towards plus (+).
 The handbrake will move away from the
handlebar grip.
Operation
109