Bosch ZEMO ZE FS P12 Translation Of The Original Operating Instructions page 149

6.20.2.2 Using the SR Suntour low-speed compression damping
Low-speed movement in the suspension fork is
caused, for example, by riding over bumps.
Figure 157: Low-speed movements
R2C2-PCS
R2C2
RC2
RC2-PCS
1
Table 119: Low-speed lever (1) on the fork crown on the SR Suntour suspension fork
low-speed lever
 Gradually turn
crown clockwise.
 The low-speed compression damper is placed
in a harder setting.
MY23Z12 - 12_1.0_26.01.2024
RC-PCS
RC
1
(1) on the
The settings on the high-speed damper control
the suspension behaviour of the fork
• during staggered jumps
• during shifts in the rider's weight
• when force is applied slowly.
RLRC-PCS
RLRC
1
low-speed lever
 Gradually turn
crown anticlockwise.
 The low-speed compression damper is placed
in a softer setting.
Operation
LORC-PCS
LORC
1
(1) on the
149