Table of Contents
Advertisement
FUNCTION MENU
2 Press " " or " ", the level changes as follows:
"Not Set" ↔ "LOW" ↔ "MED" ↔ "HIGH".
Select the level and press "OK".
Press " ", the screen returns to the "Function Menu" screen.
5.5 POWER SAVING/NIGHT QUIET SCHEDULE SETTING
This function starts and stops power savings control and
operation noise reduction control at the desired time.
Power saving/night quiet schedule settings can be set up to five
times a day on each day of the week.
The power savings schedule controls the schedule set in the
power savings mode setting.
Schedule day and time setting
Setting"
To set the desired time and level.
To set up five times a day on each day.
Schedule turn ON / OFF setting
OFF Setting"
Schedule operation is not performed while the schedule
is disabled. This is a function that temporarily prevents
the schedule from running. It is used when there is a long
vacation.
?
N O T E
When managing multiple patterns of schedules on the same day as in
•
following examples, don't set overlapped times zone.
If the schedule times zones overlap as in example 2, the schedule will
•
be cancelled at the first off time (14:00 in the case of the example 2).
16
PMML0601 rev.0 - 07/2022
"5.5.1 Schedule Day and Time
"5.5.2 Schedule Turn ON/
Example of power saving operation and schedule
setting
Example of power saving and night quiet schedule
operation
Example 1
Example 2
Advertisement
Table of Contents
