Table of Contents
Advertisement
ICON DESCRIPTION
No.
Icon
Power savings
Power savings: Low
23
Power Savings: Med
Power savings: High
24
External saving
25
Main
26
Sub
!
27
Sub
28
Quick
Other remote are in Cool/Heat
29
setting
Emergency Heating →
30
Alarm Code: **
Automatic cleaning unit
31
Mechanic error
Check the unit
Cleaning filter
32
33
Check
34
Preheating
35
Hot start
36
Defrost
37
Heat storage
38
Dust collection **-**
39
Central control
40
Time to OFF (hour)
41
Priority
42
Restriction
?
N O T E
(*1): It depends on the settings of the remote controller.
•
(*2): The default setting is cooling: set temperature +2.5°C, heating: set temperature -2.5°C.
•
If you want to change the correction value for this setback operation, please contact the distributor for more detailed information.
•
8
PMML0601 rev.0 - 07/2022
Either the outdoor capacity control, indoor rotation control, or intermittent operation control is set.
Outdoor capacity control is set on the central controller or outdoor unit.
It does not light when the indoor rotation control or intermittent operation control of the remote
controller is set.
This is the main remote controller setting.
Use the main remote controller to set the main power savings setting.
In the case of a single unit, this information is not displayed.
Sub remote controller is set. Except for some power savings functions, the sub remote controller
cannot be set to save power.
There is no main remote controller.
Controls related to power savings and operation noise reduction may not operate normally.
The operation is in quick mode.
When the operation mode set from the remote controller and the operation mode of the outdoor unit
is different, the indicator blinks.
Indicator blinks when "cooling" is set from the remote controller and when the operation mode of the
outdoor unit is "heating".
Emergency Heating Control is in progress.
** indicates the alarm code.
Indicates an error related to the automatic filter cleaning unit.
The filter is being automatically cleaned.
Indicates an abnormality in the heat storage unit.
The compressor cannot be operated because it is preheating.
Preparing for heating operation.
During the defrosting operation, the defrosting light turns on and the indoor fan stops.
When the operation is stopped during the defrosting operation, the operation light or the run indicator
goes out, but the operation continues and stops after the defrosting is completed.
It cannot be operated due to the heat storage operation time.
It is time to collect dust in the dust box of the automatic filter cleaning unit.
**-** indicates the unit to be collected.
Displayed when using the central controller. Remote controller operation is restricted.
The remaining time of the off timer when the hotel mode is displayed.
Displayed on the main remote controller only in the operation mode or when there is a setting priority
for the operation mode and the set temperature.
At this time, the operation limit lights up on the sub remote controller, and the operation mode and
temperature setting change on the sub remote controller are restricted.
Displayed on the sub remote controller only when the operation mode or the operation mode and set
temperature setting priority is given.
Description
Advertisement
Table of Contents
