Configuration Screens; Backup Screen; Restore Screen - ZyXEL Communications WAH3004 User Manual

The following table describes the labels in this screen.
Table 35 System > About
LABEL
Device Name
FW Version
IMEI

9.3 Configuration Screens

The Configuration screens allow you to backup and restore device configurations. You can also
reset your device settings back to the factory default.

9.3.1 Backup Screen

Backup Configuration allows you to back up (save) the WAH3004's current configuration to a file on
your computer. The configuration file should be saved and edited in UTF-8 (without BOM) format, if
you're using Windows Notepad, make sure you choose File > Save as UTF-8 in the text editor.
Once your WAH3004 is configured and functioning properly, it is highly recommended that you back
up your configuration file before making configuration changes. The backup configuration file will be
useful in case you need to return to your previous settings.
To access this screen, click System > Configuration > Backup. Click Backup to save the
WAH3004's current configuration to your computer.
Figure 40 System > Configuration > Backup

9.3.2 Restore Screen

This screen allows you to upload a new or previously saved configuration file from your computer to
your WAH3004.
To access this screen, click System > Configuration > Restore. Type in the location of the file
you want to upload in the Configuration File field or click Browse ... or Choose File to find it.
Remember that you must decompress compressed (.ZIP) files before you can upload them. Click
Restore to begin the upload process. The WAH3004 automatically restarts.
Chapter 9 System
DESCRIPTION
This displays the WAH3004 system name. It is used for identification.
This displays the current firmware version of the WAH3004.
This displays the International Mobile Equipment Number (IMEI) which is the serial number
of the built-in 3G module. IMEI is a unique 15-digit number used to identify a mobile device.
WAH3004 User's Guide
63