Using Syslog - ZyXEL Communications P-2602HWL-D1A Support Notes

Trap:
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Option Descriptions
Enter the correct Get Community. This Get Community must match the 'Get-' and
Get Community
'GetNext' community requested from the NMS. The default is 'public'.
Enter the correct Set Community. This Set Community must match the
Set Community
'Set-community requested from the NMS. The default is 'public'.
Enter the IP address of the NMS. The Prestige will only respond to SNMP messages
Trusted Host coming from this IP address. If 0.0.0.0 is entered, the Prestige will respond to all
NMS managers.
Trap Enter the community name in each sent trap to the NMS. This Trap Community must
Community match what the NMS is expecting. The default is 'public'.
Enter the IP address of the NMS that you wish to send the traps to. If 0.0.0.0 is
Trap Destination
entered, the Prestige will not send trap any NMS manager.

Using syslog

4. Prestige Setup
Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting
UNIX Syslog:
Active= Yes
Syslog IP Address= 192.168.1.33
Log Facility= Local 1
Community= public
Destination= 192.168.1.33
All contents copyright (c) 2005 ZyXEL Communications Corporation.
Prestige 2602HWL-DxA Support Notes
73