Firmware Upgrade - ZyXEL Communications Dimension GS-3012 Release Note

7. Classifier precedence will not follow longest prefix match.
8. Don't set to L2 multicast hardware table when getting specific or general querier message
9.
Limitation of Settings:
1. VLAN 1Q static entry 1024
2. Static MAC forwarding entry 256
3. MAC filtering entry 256
4. Cluster member 24
5. Management IP address 64
6. Classifier entry 128
7. Policy rule entry 128
8. IGMP MVR entry 256
9. IGMP filtering profile 256
10. Syslog server entry 4

Firmware Upgrade:

The GS-3012 uses FTP to upgrade firmware in run-time through its built-in FTP server. You
can use any FTP client (for example,
procedure is as follows:
Upgrade GS-3012 FW:
C:\> ftp <GS-3012 IP address>
User : <Enter>
Password: 1234
230 Logged in
ftp> put 380LH2C0.bin ras
ftp> bye
Where
• User name : just press <Enter>
• Password : the management password, 1234 by default
• 380LH2C0.bin : the name of firmware file you want to upgrade
• ras : the internal firmware name in GS-3012
Configuration Upgrade:
The GS-3012 uses FTP to upgrade firmware in run-time through its built-in FTP server. You
can use any FTP client (for example,
procedure is as follows:
Upgrade GS-3012 configuration:
C:\> ftp <GS-3012 IP address>
User : <Enter>
Password: 1234
230 Logged in
ftp> put 380LH2C0.rom rom-0
ftp> bye
Where
• User name : just press <Enter>
ftp.exe in Windows) to upgrade GS-3012. The upgrade
ftp.exe in Windows) to upgrade GS-3012. The upgrade