ZyXEL Communications Dimension GS-3012 Release Note page 15

10. Multiple management IP supported.
11. Multiple ping/traceroute instances supported.
12. New CLI supported.
13. Multiple configurations supported.
14. System configuration backup / restore in text-mode.
15. DHCP relay and relay agent information (option-82) supported.
16. Upgrade switch driver to V.4.2.6.
17. Read copper/fiber status on web.
18. Bootbase version V3.00: using new MAC prefix 00-13-49
19. Multicast
20. MVR
21. IGMP Filtering
22. CIR & PIR
23. Mac Freeze
24. Intrusion Lock
25. Syslog
26. Page support for displaying configuration
27. Reserve multicast group support
Known Issue:
1. Filtering: In some special cases, setting one MAC with discard-source will cause device
filter all packets with this MAC, ether source MAC or destination MAC.
2. When user active LACP and RSTP, sometimes LACP is failed.
3. The system needs few minutes (under 2 mins) to complete link aggregation.
4. Many to One Throughput Test failed.
5. Do not support tagged frame forwarding in the Port-Based VLAN.
Bug Fix:
Limitation of Settings:
1. VLAN 1Q static entry 1024
2. Static MAC forwarding entry 256
3. MAC filtering entry 256
4. Cluster member 24
5. Management IP address 64
6. Classifier entry 128
7. Policy rule entry 128
8. IGMP MVR entry 256
9. IGMP filtering profile 256
10. Syslog server entry 4
Firmware Upgrade:
The GS-3012 uses FTP to upgrade firmware in run-time through its built-in FTP server. You
can use any FTP client (for example,
procedure is as follows:
Upgrade GS-3012 FW:
C:\> ftp <GS-3012 IP address>
User : <Enter>
Password: 1234
230 Logged in
ftp> put 370LH0C0.bin ras
ftp.exe in Windows) to upgrade GS-3012. The upgrade