Table of Contents
Advertisement
f)
Remote controller
Figure
4-18
shows an example of basic
connection of
a remote
controller which can control operations
(1)
to
(5)
in a).
(Pin 19)
(Pin 18)
(Pin 17)
(Pin 16)
(Pin 23)
(Pin 22)
(Pin 21)
(Pin 20)
Fig.
4-18
Example of a remote
control fixture
Notes 1.
2
.
3.
4.
5.
Pin numbers in parentheses are those of the remote
control connector.
SI to SI3 and S15 to S18 are momentary-on
switches.
S14
is a rotary encoder.
It can be ordered with the following part number:
EWT-XDFS2550B
The remote control fixture
in this example
does not need
to be connected to pin 13
(+5V output).
Do not allow
50 mA. or more to be drawn from this pin for other
.purposes.
Connect pin 12
(GND)
to the enclosure of the remote
controller.
4-36
Advertisement
Table of Contents
