Table of Contents
Advertisement
Assemble "Rear Cover" with "Middle
S20
Frame"
Fix "Rear Cover" by screw *4
S21
(Screw Torque:8-10Kgf)
Insert the stand base blocks fully into
S22
the stand slot
Lift the screw handle and turn the screw
clockwise
After fully tightening the screw, fold the
screw handle flat within the recess
Attach the stand assembly to the
S23
monitor
a. Fit the two tabs on the upper part of
the stand to the groove on the back
of the display
b. Press the stand down till it snaps
into place
- 21 -
Advertisement
Table of Contents
