Table of Contents
Advertisement
Assemble "USB board" to "Middle
S12
Frame" and fix it by screw*1
Insert 2 "USB board FFC" and "USB
board Wire" into "Interface board"
Paste an acetate tape to fix "USB board
Wire" on "Panel"
(Screw Torque: 4.5±0.5 Kgf)
Insert "Ambient Light Sensor FFC" into
S13
"Sensor board"
Assemble "Sensor board" into "Middle
S14
Frame"
Insert "Ambient Light Sensor FFC" into
"Interface board"
Adhere "Ambient Light Sensor FFC" on
"Main Shielding"
Assemble below mylars to "Main
S15
Shielding"
a. MYLAR BL
b. MYLAR USB
c. MYLAR SPK
d. MYLAR ALS
- 19 -
Advertisement
Table of Contents
