Table of Contents
Advertisement
Assemble "Middle Frame" to "Panel"
S6
Lock 19 screws to fix "Middle Frame"
with "Panel"
(Screw Torque: 3.5-4.0 Kgf)
Insert "FFC EDP" into "Panel"
S7
Adhere a yellow tape to fix "FFC EDP"
S8
connector
Adhere an acetate tape to fix "FFC
EDP" on "Panel"
Place "Main Shielding" on "Panel" and
S9
lock 4 screws to fix it on "Panel"
(Screw Torque: 4.5-5.5 Kgf)
Align with "Middle Frame" to assemble
S10
a "Gasket" on "Panel"
Insert 2 "USB board FFC" and 1 "USB
S11
board Wire" into "USB board"
- 18 -
Advertisement
Table of Contents
