Related Manuals for Feider Machines FPVP600
Summary of Contents for Feider Machines FPVP600
- Page 1 ORIGINAL INSTRUCTIONS >EN INSTRUCTION MANUAL AUTOFEED SCREW DRIVER Model: FPVP600 BUILDER SAS 32, rue Aristide Bergès-ZI31270 Cugnaux-France MADE IN PRC - 2021 CAUTION: READ INSTRUCTIONS BEFORE USING THIS TOOL.
-
Page 2: Table Of Contents
ORIGINAL INSTRUCTIONS >EN CONTENT 1. SAFETY INSTRUCTIONS 2. PRODUCT DESCRIPTION 3. SPECIFICATIONS 4. OPERATION 5. MAINTENANCE AND SERVICING 6. TROUBLESHOOTING 7. DISPOSAL 8. EC DECLARATION OF CONFORMITY 9. WARRANTY 10. PRODUCT FAILURE 11. WARRANTY EXCLUSIONS... -
Page 3: Safety Instructions
ORIGINAL INSTRUCTIONS >EN 1. SAFETY INSTRUCTIONS Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 ORIGINAL INSTRUCTIONS >EN c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on.
- Page 5 ORIGINAL INSTRUCTIONS >EN SCREWDRIVER SAFETY WARNINGS 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. 2.
-
Page 6: Product Description
ORIGINAL INSTRUCTIONS >EN Symbols Conforms to relevant safety standards To reduce the risk of injury, the user must read and understand this manual before using this product. Wear eye protection. Wear hearing protectors. Exposure to noise can cause hearing loss. Do not dispose of old appliances with domestic rubbish Class II, double isolation 2. -
Page 7: Specifications
ORIGINAL INSTRUCTIONS >EN 3. SPECIFICATIONS Rating voltage 220-240V~, 50/60Hz Power 600W No load speed 0-4000/min Chuck Size 1/4" Hex Degree protection IP20 Insulation protection Class II Weight 1.54 kg Sound pressure level L 80dB(A), K =3dB(A) Sound power level L 91dB(A), K 3dB(A) Vibration... -
Page 8: Operation
ORIGINAL INSTRUCTIONS >EN 4. OPERATION WARNING ! TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section. 4.1 Changing Bit Holders 1) Twist and pull forward on the Depth Collar to remove it from the Head Cover, see Figure A. -
Page 9: Maintenance And Servicing
ORIGINAL INSTRUCTIONS >EN 2) Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working. -
Page 10: Troubleshooting
ORIGINAL INSTRUCTIONS >EN 6. TROUBLESHOOTING Problem Possible causes Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is 3. -
Page 11: Ec Declaration Of Conformity
32, rue Aristide Bergès -Z1 31270 Cugnaux - France Tel: +33 (0) 5.34.508.508 Fax: +33 (0) 5.34.508.509 Declare that the machine designated below: AUTOFEED SCREW DRIVER Model: FPVP600 Serial number: 20210447872-20210448871 Conforms to the provisions of the Machinery Directive 2006/42 / EC and the national regulations transposing... -
Page 12: Warranty
9. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 13: Product Failure
10. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 14: Warranty Exclusions
11. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the FPVP600 and is the answer not in the manual?
Questions and answers