Related Manuals for Feider Machines FVAC20V-A
Summary of Contents for Feider Machines FVAC20V-A
- Page 1 ORIGINAL INSTRUCTIONS>EN CORDLESS IMPACT SCREWDRIVER FVAC20V-A USER GUIDE CAUTION:Read the instructions before using the tool.
-
Page 2: Table Of Contents
CONTENTS 1. WARNING INSTRUCTIONS 2. INTENDED USE 3. PRODUCT DESCRIPTION 4. SPECIFICATIONS 5. OPERATION 6. MAINTENANCE & CLEANING 7. STORAGE 8. DISPOSAL 9. DECLARATION OF CONFORMITY 10. WARRANTY 11. PRODUCT FAILURE 12. WARRANTY EXCLUSIONS... -
Page 3: Warning Instructions
1. WARNING INSTRUCTIONS 1.1 GENERAL POWER TOOL SAFETY INFORMATION WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 h. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care Do not force the power tool.
- Page 5 Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. 1.2 SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGER Batteries ...
-
Page 6: Intended Use
1.4 SYMBOLS Conforms to relevant safety standards. To reduce the risk of injury, the user must read and understand this manual before using this product. Wear ear protectors. Exposure to noise can cause hearing loss. Wear eye protection. Class II, double isolation(only for charger). Do not dispose of old appliances with domestic rubbish. -
Page 7: Specifications
Fig. 1 Drive bit retaining ring Forward / reverse selector Handle Hook Battery platform Variable speed on/off trigger LED work light 4. SPECIFICATIONS Power supply 20 V d.c. Bit shank size 1/4” (6.35mm hex) No Load Speed 0-2800/min Impact rate 0-3000 min Battery type Recommendation of battery to use:... -
Page 8: Operation
Need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Wear hearing protection. - Page 9 5.2 CHARGER INDICATOR Indicator status Explanations and actions Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger. Charging The charger is charging the battery pack in charge mode. Battery pack is full of charge.
-
Page 10: Maintenance & Cleaning
6. MAINTENANCE & CLEANING WARNING! Never use solvents such as petrol, alcohol, ammonia water etc. The solvents may damage the plastic parts. CAUTION! Always remove the battery before cleaning. 6.1 MAINTENANCE The impact driver is designed to operate over a long period of time with a minimum of maintenance. All maintenance and repair must be performed by an authorised service centre. -
Page 11: Declaration Of Conformity
Tel : + 33 (0) 5.34.502.502 Fax : + 33 (0) 5.34.502.503 Declares that the machinery designated below : cordless impact screwdriver FVAC20V-A Serial number: 20211003469-20211003968 Complies with the provisions of the Directive « machinery » 2006/42/CE and national laws transposing it :... -
Page 12: Warranty
10. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identifed as defective by the designated distributor. -
Page 13: Product Failure
11. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank if your product has one. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 14: Warranty Exclusions
12. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 15 BUILDER SAS 32, rue Aristide Bergè s - ZI 31270 Cugnaux - France MADE IN PRC...
Need help?
Do you have a question about the FVAC20V-A and is the answer not in the manual?
Questions and answers