Related Manuals for Feider Machines FPV20V2B2B
Summary of Contents for Feider Machines FPV20V2B2B
- Page 1 ORIGINAL INSTRUCTIONS 20V CORDLESS DRILL FPV20V2B2B READ THIS MANUAL BEFORE USING THIS TOOL BUILDER SAS ZI – 32, rue Aristide Bergès, 31270 Cugnaux, France MADE IN RPC 2021...
- Page 2 1. Safety instructions WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Page 3 f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 4 NOTE The temperature „130 °C“ can be replaced by the temperature „265 °F“. g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
- Page 5 Residual risks Even with use of the tool as described, it is impossible to eliminate all residual risk factors. The following hazards may be present in connection with the construction and design of the tool: 1. Pulmonary lesions if an effective mask is not worn. 2.
-
Page 6: About Your Product
2. ABOUT YOUR PRODUCT a. Description 1. Two speed gear 7. Touch ON / OFF 2. Torque adjustment ring for drilling 8. Handle / drilling / 9. Unlocking the battery 3. Adjusting the chuck 10. Battery 4. Mandarin 11. Belt clip 5. -
Page 7: Operation
Informations The total declared vibration value was measured using a standard test method and can be used to compare one tool with another. The total declared vibration value can also be used in a preliminary exposure estimate Warning The emission of vibration during actual use of the machine tool may differ from the total declared value depending on how the tool is used. - Page 8 The battery is fully charged when the 4 indicators are illuminating. b.Battery instal Warning! Always remove the battery from the tool when assembling accessories, making adjustments, during transportation, or when the tool is not in use. Removing the battery will prevent accidental starting which could result in serious personal injury NOTE: To avoid serious personal injury, always remove the battery and keep hands away from the lock button when carrying the tool...
- Page 9 - Make sure the battery locks in place and is securely attached to the tool before starting operations Improper battery installation can damage internal components c.Removing the battery - Make sure the tool is not running - Push and hold the battery release button. Then slide the battery out of the tool d.Installation of a drill - Put the normal / reverse button in the central position - Turn the chuck until the opening is larger than the size of the drill to be used(1)
- Page 10 - The belt clip can be attached to the other side of the tool, using only the screw provided, to fit right or left handed users - To change the place clip, remove the screw that holds it, then re-attach it on the other side. Be sure to tighten the screw securely Note: the belt is not supplied with the tool g.Starting and stopping the operation...
- Page 11 i.Two-speed gear Use slow speed (1) for high power and high torque, and fast speed (2) for rapid drilling or for screwing Do not change gears while the drill is running. Tool could be damaged j.Torque setting This device allows you to adjust the torque or tightening power of your drill, and depending on the application, several levels of training are required.
-
Page 12: Maintenance And Storage
c.Chocking of the part To prevent the bit from turning the part if it gets stuck in the hole, it is recommended to use a vice or other fixing device to immobilize the part during drilling. If the bit gets stuck in the work or if the drill stalls, stop the tool immediately. Remove the bit from the workpiece and determine the reason for the wedge Note: The drill is equipped with an electric brake. - Page 13 ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – FRANCE Declares that the machinery designated below : 20V CORDLESS DRILL Model : FPV20V2B2B Serial number : 20210724640-20210725139 Complies with the provisions of the Directive « machinery » 2006/42/CE and national laws...
-
Page 14: Warranty
7. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 15: Product Failure
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 16: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the FPV20V2B2B and is the answer not in the manual?
Questions and answers