Panasonic EASA-PHONE KX-T2740 Operating Instructions Manual page 65

How to Operate from a Remote Phone ont)
lf you have used Memory Playback
Press "3".
"Reset" will be announced, and the unit will rewind the tape to the
beginning of newly-recorded messages and a beep will be heard.
Press "3" again.
"Reset" will be announced and future messages will be recorded
from the beginning of the ICM tape.
If you have reset the tape by mistake
Press "2",
after beep is heard.
ABC "Skip" will be announced, and the unit will advance the ICM tape
2 to the end of the recorded messages, then hang up.
See eran cmeramesinemmensomceee === CU UU anne oat Oe nO Oey
MONITORING ROOM SOUND
You can monitor sounds in the room where the unit is installed.
Call your unit.
Then press your code number during OGM.
@®
=
<=
©
L3°3
=
Ho
—
x
feb)
=
(42)
c
<
Press "5"
right after you hear the synthesized voice telling the number of the
JKL recorded messages.
5 "Room Monitor" will be heard.
You can listen for 30 seconds.
To listen further, press "5" again within 5 seconds of hearing one
beep.
o/