Table of Contents
Advertisement
Mm PLAYBACK
The unit will rewind the tape and play
back all the recorded messages.
@ After the last message, the voice will
say, "End of final message".
@{f "End of tape" is announced, the ICM
tape is full.
@\f you want to operate in succession,
wait for 5 seconds. The unit will re-start
Voice Menu from the beginning.
Mi MEMORY
PLAYBACK
The unit will play back the newly recorded
messages.
M MARKER MESSAGE
You can leave your index message on the
ICM tape.
1) Start to talk right after "Marker
Message" is announced.
2) When finished, hang up.
RESET
The unit will rewind the tape to the
beginning.
M ROOM
MONITOR
You can screen any sound in the room
where the unit is installed for 30 seconds.
mM RECORDING OGM
You can re-record the OGM remotely. The
voice will say; "Please push 7 to start
recording OGM 1. Please push 8 to start
recording OGM 2. Please push 9 to end."
1) Press "7".
@ Short beeps will be heard
continuously until the OGM tape has
reset and then a long beep will be
heard.
2) Speak clearly and loudly after the long
beep.
3) When finished, push "9".
@ The new OGM will be played back.
So you can check or amend it.
@ If you pause for over 2 seconds
while recording, the unit will sound 6
beeps and announce "Please record
your Outgoing Message again." If
this happens, repeat from step 1.
m TO REWIND/FAST FORWARD/
RESET DURING PLAYBACK
Press "9" while messages are being
played, the voice will say; "Please push 1
for Back Space, 2 for Skip, 3 for Reset."
@ Press "1" or "2": The tape will rewind
or skip forward for approximately 15
seconds corresponding to playback
time.
@ Press "3": The unit will rewind the tape
to the beginning.
>
pom J
n-
se
om
pat
pan |
'cS
=
ret)
O
=
om
Advertisement
Table of Contents
