Panasonic EASA-PHONE KX-T2740 Operating Instructions Manual page 16

LINE-OGM MODE
OGM SELECT © *L1-OGM1
L2-OGM2
[LINE MODE
POWER FAILURE
LINE SELECT
L1°*L2
RINGER
LINE 1 LINE2
OFF * °° HIGH OFF ® ® ° HIGH
L LOW
Ow
DIALING MODE
PULSE*® © TONE
VOLUME
MIN _———«<«#! MAX
ANS. LINE SELECTOR
AUTO® * * LINE 1
LINE 2
Set the LINE OGM MODE SELECTOR
OGM
SELECT: The preselected OGM (OGM 1 or OGM 2) will
be played in answer to a call coming in on either
line (Line 1 or Line 2).
L1-OGM 1: AcallL1 plays OGM 1 and one on L2 plays
L2-OGM 2 OGM 2 respectively.
Set the LINE MODE SELECTOR
A---Normally line mode Selector is Set to A
B---Set it to B when your unit is connected to PBX.
Set the POWER FAILURE SELECTOR
This switch-serves to select the line to be used when a
power failure occurs.
Set the Ringer Volume SELECTOR set to
HIGH
| HIGH: The ringing sound will be high.
LOW: The ring sound will be low.
OFF: The telephone will not ring.
Set the volume
Used to select the desired volume level.
Set the ANS LINE SELECTOR
Auto: The unit can answer a call arriving on either of LINE 1
or LINE 2.
LINE 1: The unit answers a call arriving only on LINE 1.
LINE 2: The unit answers a call arriving only on LINE 2.
uon