H3C MSR3600 Manual page 51

LED
VPM
USB console port
LED
Console port LED
Micro SD card LED
SYS (applicable to
MSR3610-X1/MSR3
610-XS/MSR3610-X
1-DP/MSR3610-X1-
DC/MSR3610-X1-DP
-DC)
Hard disk LED (HD)
GE
Gigabit Ethernet
copper port LED
LED for combo
copper port
FE
SFP
LED for combo fiber
port
State
Steady green
Steady yellow
Off
Steady on
Off
Steady on
Off
Steady green
Flashing green
Off
Green
Flashing green at 8 Hz
Yellow
Off
Green
Flashing green (8 Hz)
Yellow
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Steady green
Flashing green
Off
Steady green
Flashing green
Steady yellow
1-44
Description
An inserted VPM has passed the detection.
An inserted VPM did not pass the detection.
No VPM in the slot.
The router is using the USB console port for
configuration.
The router is not using the USB console port.
The router is using the console port for configuration.
The router is not using the console port.
An inserted Micro SD card has passed the detection.
The system is writing data to the Micro SD card.
No Micro SD card is inserted or a Micro SD card is
incorrectly inserted.
The Micro SD card is in position and has passed the test.
The system is accessing the Micro SD card and data is
being sent and received.
The Micro SD card has failed.
No Micro SD card is in position, or the card is not
identified.
The hard disk is in position and has passed the test.
The system is accessing the hard disk and data is being
sent and received.
The hard disk has failed.
No hard disk is in position or the hard disk is removed.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
•
For the MSR3610-G or MSR3620-G router, a 100
Mbps link is present.
•
For other routers, a 10/100 Mbps link is present.
•
For the MSR3610-G or MSR3620-G router, data is
being received or transmitted at 100 Mbps.
•
For other routers, data is being received or
transmitted at 10/100 Mbps.
No link is present.
A link is present.
Data is being received or transmitted.
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 100 Mbps link is present. (Not supported on the
MSR3610-G/MSR3620-G router.)