Midea MFYA400-24HRFN8-QRD0W User Manual page 93

Buttons and Functions
1
4
5
8
9
12
Turbo
Model:
RG10B1(B2)/BGEF
RG10B1(B2)/BGCEF
(Cooling only models, AUTO mode
and HEAT mode are not available)
Description
ON/OFF
No.1
Turn the unit on or o .
MODE
No.2
Auto > Cool > Dry > Heat > Fan
NOTE: HEAT mode is not supported by the cooling only
appliance.
SLEEP
No.3
2
Saves energy during sleeping hours.
3
TEMP.
Increases temperature in 1°C (1°F) increments. Max. tem-
No.4
perature is 30°C (86°F).
6
(Press together
7
will alternate the temperature display between the °C & °F).
SET
10
No.5
Follow Me > AP mode > Follow Me
11
[*]: Model dependent
13
14
OK
No.6
Used to confirm the selected functions
TIMER
No.7
Set timer to turn unit on or o
TEMP.
No.8
Decreases temperature in 1°C (1°F) increments. Min. tem-
perature is 16°C (60°F)
FAN SPEED
No.9
Auto > Low > Med > High > Fan
SWING
Starts and stops the horizontal louver movement. Hold
No.10
down for 2 seconds to initiate vertical louver auto swing
feature(some units).
AIR MAGIC
Used to start/stop the Fresh and UV-C lamp (if any)
No.11
function.
TURBO
No.12
Turbo
Reach desired temperature in shortest possible time.
LED
LED
No.13
Turns LED display & air conditioner buzzer on and o
CLEAN
No.14 Clean
Used to start/stop the Self Clean or Active Clean function.
Turbo
No.15
LOCK
Press together these two buttons simultaneously for 5 seconds
to lock the keyboard. Press together these two buttons for 2
seconds to unlock the keyboard.
& buttons at the same time for 3 seconds
*
Clean
37