Midea MFYA400-24HRFN8-QRD0W User Manual page 86

Operation buttons
3 Speed
HEAT: Permits heating operation (For cooling & heating
models only). (Temperature range:16°C/17°C~30°C or
20°C~28°C).
FAN only: Permits fan operation without cooling or heating. In this
case, however, the setting temperature is not displayed and you
cannot adjust the set temperature.
NOTE: If the unit is turned o under COOL, AUTO or DRY mode
with the set temperature less than 24 °C, the set temperature will
be automatically set to 24 °C when you turn on the unit again. If
the unit is turned o under HEAT mode with the set temperature
more than24 °C, the set temperature will be automatically
set to 24 °C when you turn on the unit again (Applicable to some
India products only).
This button is used to select the desired fan speed.
For model A, each time you push the button, the fan speed is
shifted in the following sequence:
Au>20% >40% > 60% > 80% > F%>Au
Press the + or - button to increase/ decrease the fan speed in
1% increments.
FAN SPEED DISPLAY:
1 2 3 4 5 6 7 8 910
FAN SPEED LEVEL
1%-10%
11%-20%
21%-30%
31%-40%
41%-50%
51%-60%
61%-70%
71%-80%
81%-90%
91%-100%
For model B, each time you push the button, the fan speed is
shifted in the following sequence:
LOW MED(some units)
30
Description
INDICATOR
HIGH AUTO