Midea MFYA400-24HRFN8-QRD0W User Manual page 88

More features
NOTE
Not all the functions are available for the air conditioner you purchased, please check the indoor display
and remote control of your unit.
Default Setting
When the air conditioner restarts after a
power failure, it will default to the factory
settings (AUTO mode, AUTO fan, 24°C /76°F).
This may cause inconsistencies on the remote
control and unit panel. Use your remote
control to update the status.
Refrigerant Leak Detection System
(some models)
In the event of a refrigerant leak, the LCD
screen will display "EC" or "EH0C"
(Model dependent).
Wireless Control (some units)
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried
out by professional sta .
To further optimize the performance of your unit, do the following:
•
Keep doors and windows closed.
•
Limit energy usage by using TIMER ON and TIMER OFF functions.
•
Do not block air inlets or outlets.
•
Regularly contact an authorized service center to inspect and clean air filters.
Auto-Restart (some models)
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Louver Angle Memory Function (some models)
Some models are designed with a louver angle
memory function. When the unit restarts after a
power failure, the angle of the horizontal louvers
will automatically return to the previous position.
The angle of the horizontal louver should not be
set too small as condensation may form and drip
into the machine.
32