Table of Contents
Advertisement
3-3. Replacing the AC/DC Converter Unit
3. Remove the two screws, and remove the PC board
upper rail to the arrow direction.
4. Disconnect the connector (brown) of AC/DC convert-
er, and remove the two screws.
AC/DC converter
3-6 (E)
B3 x 6
PC board upper rail
PSW3 x 6
Connector (brown)
5. Slide the AC/DC converter to the arrow direction until
the connector (white) fully can be recognized.
6. Disconnect the connector (white), and remove the AC/
DC converter.
AC/DC converter
7. Install the new AC/DC converter in the reverse order
of steps 1 to 6.
[Note|at|installation]
When fixing the screws, you are advised to do it with
pressing the AC/DC converter downward in view of
accurate and solid positioning.
Connector
(white)
HDC-900/950 MM
Advertisement
Table of Contents
