21.
Locate Vent Window. Vent Window has pre installed hinges. Position window over open rafter
section left in the previous step. Poly on window will overhang the rafters. Leave 1/4" on either side
of window framing. Have one person hold the window open while the second screws the hinges into
the Ridge Board.
Pieces:
- 1x Vent Window
(1/4" x 26 1/2" x 31")
22.
Position Vent Window Cleat on underside of Rafters below the Vent Window. The Cleat should
be approximately 24 1/2" from the Ridge Board. Fasten Cleat to Rafters with 1 - 2 1/2" Brown Screw
on each end.
Pieces:
- 1x Vent Window Cleat
(3/4" x 2 1/2" x 26 1/2")
Outdoor Living Today
www.outdoorlivingtoday.com
Page 23
Hardware:
- 6x 3/4" Black Headed Screws
Hardware:
- 2x 2 1/2" Brown Screws
sales@outdoorlivingtoday.com