Advertisement
12.
Locate King Studs. Center King Stud on Door Header, making sure the dado in the lumber is
lined up. These need to be lined up so the windows can easily be dropped in. When positioned
correctly, fasten King Stud to Door Header with 2 - 2 1/2" Brown Screws each at a slight angle.
Pieces:
- 2x King Stud
(3 1/2" x 3 1/2" x 4 5/8")
13.
Lay out Ridge Board pieces on a flat and level surface. If you have a clamp available, use to
hold the Ridge Boards tight together. Fasten both halves of Ridge Board together with 9 - 1 1/4"
Brown Screws per side.
Pieces:
- 2x Ridge Board A
(1" x 4 1/2" x 47 3/4")
- 2x Ridge Board B
(1" x 4 1/2" x 29 3/4")
- 1x Ridge Board C
(1" x 4 1/2" x 36")
Outdoor Living Today
A
C
B
www.outdoorlivingtoday.com
- 4x 2 1/2" Brown Screws
- 18x 1 1/4" Brown Screws
Page 18
Hardware:
Hardware:
sales@outdoorlivingtoday.com
Advertisement
