Selecting Settings
Entering the code
The menu Settings - Supervisor level must be activated
by Technical Service.
The menu "Settings" (except Languages J) is locked with
a code to prevent unwanted access.
Settings
^ Select "Supervisor level" and confirm.
Settings
Supervisor level
^ Select "Access via code" and confirm.
^ Enter the code "0 0 0" (factory default).
If a wrong code is entered three times, the code entry will
be locked for 1 hour.
^ Turn the jog shuttle until the first digit shows. Confirm the
digit. Enter the second and third digit.
Settings - Supervisor level
BackA
Language F
Supervisor level
BackA
Access via code
_ _
0
Enter code
63