Panasonic Digital Palmcorder PV-DV351 Operating Instructions Manual page 31

[ View Recording/Playback on"
your TV
''/?]?•
[
TV with AUDIO/VIDEO IN Jacks ]
r
Before you begin-
• When using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal (See page 12)
1 Set POWER to CAMERA or VCR
To view what the Palmcorder is
recording or to playback a tape on your
TV
Note
• For PV-DV701 users
When using VCR mode, first set to
AV-JACK "OUT/PHONES" in the VCR
Mode Menu {See page 17 )
2 Turn your TV ON and set it to LINE
INPUT or S-VIDEO
Check your TV operating instructions
for further information
3
Start playback or begin a recording
• Make sure the Palmcorder and TV are
[ TV with S-VIDEO IN Jacks ]
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV
(Not supplied)
turned off while connecting
• Please connect the
AN
Cable securely
Note
(Remote Control Only)
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on remote control Press
again to remove the indications
DISPLAY
ON TV
Button
PV-DV701 Supplied
PV-PV351 Optional
CATV System Installer
This reminder is provided to call the
CATV system installer's attention to
Article 820-40 of the NEC in USA (and to
the Canadian Electrical code in Canada)
that provides guidelines for proper
grounding and, in particular, specifies
that the cable ground shall be connected
to the grounding system of the building,
as close to the point of cable entry as
practical
31