Panasonic Digital Palmcorder PV-DV351 Operating Instructions Manual page 12

Caution:
• Charge only with specified charger.
• Charge the 8attery within an ambient
temperature range of 32° F (0° C) and 104° F
(40° C).
• The Battery may be warm after charging or just
after use. This is normal.
• Do not use an insufficiently charged or worn out
Battery.
• If charging is done in extreme low or high
temperatures, Battery charge time increases.
Safety precautions:
• Do not place the Battery near, or dispose of in fire.
• Do not directly connect (short circuit) the positive
(+) and negative (-) terminals.
• Never attempt to disassemble or reassemble the
Battery.
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery with specified models only.
• If the Battery is used in extremely high
temperatures, a safety device will automatically
prevent operation.
To insure longer battery life:
• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place. If you leave the Battery in
the Palmcorder or on the AC Adaptor, the Battery
will no longer be rechargeable.
• Keep the Battery terminals clean.
U.S.A. CONSUMERS: ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Use AC Adaptor^
1
BATT RELEASE
Switch
DC IN Terminal
Slide the Battery downward while
sliding the BATT RELEASE Switch to
remove the Battery Pack.
(See page 11.)
Insert the DC Cable
into the DC IN
Terminal.
Connect the other end of the DC
Cable
to the AC Adaptor as shown.
Plug in the AC Adaptor.
• The POWER Lamp on the AC
Adaptor lights up.
DC Cable
(Supplied)
POWER
Lamp
12
• When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor consumes
1 W of electric power when plugged into
an AC outlet even when not in use.)
-DC Output Connector
For assistance, please call: 1 -800-211 -PAN A(7262) or
send e -mail to: consumerproducts@panasonic.com